54" wide Ford 9 Inch Round Back Rear End Housing Kit with 31 spline axles & hdwe

Description

Ford 9 Inch Round Back Rear End Housing Kit with 31 spline axles and hardware.
54" wide track width; Centered rear end pinion yoke between wheel flanges when center section is installed.
this rear end will measure 54" wide when big bearing 9" Ford Axles are installed with 2.5" brake spacing.
flanged 31 spline axle axles have 3.15" bearings installed
axles are cut to length to match the housing, 28.6" passenger side and 24.25" driver side.
axles have three bolt patterns in all axles, 5 x 4.5" small ford, 5 x 4.75" GM and 5 x 5".
2.78" OD
Hub Registers on axles.
Housing will measure 49" from housing end to housing end without axles
1/2" press in wheel studs included, 1.5" long for street and custom wheels.
reconditioned small web hump back center with new 3" x .188" wall DOM tubing.
tubes are sleeved for strength
Housing ends;  New Style Big Ford Torino with .375" (3/8) bolt holes
4 bolt axle retainers included.
3/8" T-bolts kits included, will match housing ends chosen.
new studs installed in housing
Most of the housings have a stock fill plug in back cover
we can install 3/4 npt drain plug on bottom of housing if requested
Note from seller:
These are
Reconditioned
centers and they will have pitting and dings.  We also offer New housings with New stamped centers and they can be found in our other listings… Please see picture for example…
The rear end kit will ship via UPS Ground
or Speedee Delivery in the upper Midwest
We will build the housing after you give us the housing ends you want.  Usually build time is 3-4 days.
WARNING: Cancer
And Reproductive Harm-
www.P65Warnings.ca.gov