-40%
Ruffstuff Ford 9" Weld On Disc Brake Bracket, 3.0" Tubes (Weld On 3/8" x2)
$ 36.4
- Description
- Size Guide
Description
Ford 9" Weld On Disc Brake Bracket, 3.0" Tubes With BRAKE LINE TABS (Weld On 3/8" x2)These can be used on 2.75"-3" diameter axle tubes and are made for the 11.75" diameter Bronco 5 on 5.5" rotors and the inexpensive '73-87 Chevy 3/4 ton 4x4 front caliper. You can use any of the 20 or so high performance calipers that share the 7.05" caliper pin spacing also but the Chevy seems more than good enough for nearly everyone.
These are 3/8" thick. These are made for mounting the rotor on the back side of the wheel hub/ flange but some applications can be turned down for a slip over rotor
Sold in pairs
Requires steel wheel 15" with a maximum 4" back spacing
NAPA Part numbers for Front 4x4 Chevy Calipers and Bronco Rotors:
Caliper ONLY: LH - N4674, RH - N4673 - Both of these are LATER year part numbers
OR
LH - N4597, RH - N4596 - Both of these are EARLIER year part numbers
Ford 9" Rotor - NB 4885611 Premium Rotor
UP 85611 Ultra Premium